# Push Notifications Push notifications enable reliable delivery of incoming calls to your Android app, even when the app is in the background, closed, or the device is locked. Sinch uses Google Firebase Cloud Messaging (FCM) v1 for Android devices and also supports Huawei Mobile Services (HMS) Push for Huawei devices. To receive calls via push: - Configure FCM v1 / HMS OAuth endpoints in your backend and provide them in the Sinch Dashboard. - Acquire the device’s push token (FCM or HMS) and register it with Sinch using `SinchClient` push configuration APIs. - Implement a lightweight listener service that forwards Sinch push payloads to the running `SinchClient`. This page covers both the FCM v1 and HMS requirements and flow. ## Receiving Incoming Calls via Push Notifications To receive incoming calls via Push Notifications, the *application instance* must start `SinchClient` with a valid push configuration so the device token is registered on the Sinch backend. Push Notifications allow reception of an incoming call even if the phone is locked, or the application is in the background or closed. Sinch SDK supports both currently available major Push Notification platforms on Android - [Google's Firebase Cloud Messages](#google-fcm-push-notifications) (later FCM) and [Huawei Mobile Services Push Notifications](#huawei-hms-notifications) (Huawei Push or HMS Push). Note: *application instance* must register itself on the Sinch backend to receive Push Notifications using either FCM or HMS. Registering towards the Sinch backend to receive incoming call push notifications via FCM or HMS Push is quite [similar](#fcm-vs-hms-push-registration-steps-comparison) and consists of several topics, which are covered below. ## FCM vs HMS Push Registration Steps Comparison | Step | FCM Specific | Notes | | --- | --- | --- | | 1. [Enable support of the push notifications in *Sinch Client*](#fcm-step-1-enable-support-for-push-notifications) | Happends automatically when `FcmPushConfiguration` is provided | | | 2. [Update Sinch dashboard with required provider identification](#fcm-step-2-update-sinch-dashboard-with-required-provider-identification) | Add FCM identification in the Sinch dashboard | | | 3. [Provision your application with FCM support code](#fcm-step-3-provision-application-with-support-code) | Use **gooogle-services.json** | Acquire files online in FCM Consoles | | 4. [Acquire a unique *push configuration* from FCM](#fcm-step-4-acquire-fcm-push-configuration) | Automatic | | | 5. [Register the *push configuration* on the Sinch backend](#fcm-step-5-register-fcm-push-configuration-on-sinch-backend) | Use `FcmPushConfigurationBuilder` | | | 6. [Implement *listening service*](#fcm-step-6-implement-listening-service) | Derive from `FirebaseMessagingService`Use `RemoteMessage.getData()` | Minor differences in the `RemoteMessage` API | | Step | HMS Specific | Notes | | --- | --- | --- | | 1. [Enable support of the push notifications in *Sinch Client*](#hms-step-1-enable-support-for-push-notifications) | Happens automatically when `HMSPushConfiguration` is provided | | | 2. [Update Sinch dashboard with required provider identification](#hms-step-2-update-sinch-dashboard-with-required-provider-identification) | Specify HMS authentication mode in the Sinch dashboard | | | 3. [Provision your application with HMS support code](#hms-step-3-provision-application-with-support-code) | Use **agconnect-services.json** | Acquire files online in HMS Console | | 4. [Acquire a unique *push configuration* from HMS](#hms-step-4-acquire-hms-device-token) | | | | 5. [Register the *push configuration* on the Sinch backend](#hms-step-5-register-hms-device-token-on-sinch-backend) | Use `HmsPushConfigurationBuilder` | | | 6. [Implement *listening service*](#hms-step-6-implement-listening-service) | Derive from `HmsMessageService`Use `RemoteMessage.getDataOfMap()` | Minor differences in `RemoteMessage` API | ## Google FCM Push Notifications The following sections take you through the process of registering Google FCM push notifications: ### FCM Prerequisites To use FCM Push notifications you must also implement the [FCM v1 OAuth2.0 Flow](#fcm-v1-oauth20-flow). ### FCM Step 1. Enable support for Push Notifications This step is almost the same for both FCM and HMS. Enabling managed push notifications happens automatically once `PushConfiguration` is specified during Sinch Client creation. ```kotlin val sinchClient = SinchClient.builder().context(context) .pushConfiguration(fcmPushConfiguration) ... .build() ... sinchClient.start() ``` ### FCM Step 2. Update Sinch dashboard with required provider identification Configure the FCM v1 OAuth settings in the Sinch Dashboard as described in [FCM v1 OAuth2.0 Flow](#fcm-v1-oauth20-flow). ### FCM Step 3. Provision application with support code Provisioning your application with the support code to receive FCM push notifications is straightforward. You'll need to acquire a configuration file `google-services.json` from the FCM console and add it to your project. You can add Firebase to your app either semi-automatically using Android Studio, or manually by following the [official setup guide](https://firebase.google.com/docs/android/setup). For manual setup, register your application in the [Firebase console](https://console.firebase.google.com/). If your project already uses FCM, the console will prompt you to import it as a new Firebase Cloud Messaging project. Register your application using the console and download `google-services.json` into your project's main folder. Sample SDK projects `sinch-rtc-sample-push` and `sinch-rtc-sample-video-push` require your own `google-services.json` to build. Without this file, Gradle will show an explanatory error and stop the build. The `google-services.json` file automates Firebase setup for your app. Android Studio's plugin `com.google.gms.google-services` parses it and adds relevant resources and permissions to your application's manifest automatically. ### FCM Step 4. Acquire FCM push configuration Note: When using FCM your app must include `com.google.firebase:firebase-messaging` as a dependency. Snippets below use APIs provided by that library. For using FCM push configuration to work you have to obtain 2 string properties: - Sender ID - Registration token Getting the sender ID is easy. Once the Firebase app is created it doesn't change and is bundled into the `google-services.json` file. You can check it in your Firebase console project settings or get it synchronously at runtime: ```kotlin val APP_FCM_SENDER_ID: String = FirebaseApp.getInstance().options.gcmSenderId.orEmpty() ``` The registration token must be obtained asynchronously and it can change during the application's lifetime. Use below code to acquire the registration token: ```kotlin FirebaseMessaging.getInstance().token.addOnCompleteListener { task: Task -> if (task.isSuccessful) { val registrationToken = task.result } } ``` Track token changes in [onNewToken](https://firebase.google.com/docs/reference/kotlin/com/google/firebase/messaging/FirebaseMessagingService#onNewToken(java.lang.String)) and recreate your `SinchClient` instance in such cases (see `sinch-rtc-sample-push` for a complete use case). ### FCM Step 5. Register FCM push configuration on Sinch backend Create an instance of *FcmPushConfiguration* using the [FcmPushConfigurationBuilder](https://download.sinch.com/android/latest/reference/sinch-rtc/com.sinch.android.rtc/-fcm-push-configuration-builder/index.html) and provide it to `SinchClient` during build. Start the client to register the device token with Sinch. ```kotlin val pushConfiguration = PushConfiguration.fcmPushConfigurationBuilder() .senderID(APP_FCM_SENDER_ID) .registrationToken(registrationToken) .build() val sinchClient = SinchClient.builder() .context(getApplicationContext()) .applicationKey("") .userId("") .environmentHost("ocra.api.sinch.com") .pushConfiguration(pushConfiguration) .build() sinchClient.addSinchClientListener() sinchClient.start() ``` ### FCM Step 6. Implement *Listening Service* Implement your *FcmListerningService* by extending the *FirebaseMessagingService*: ```kotlin ... class FcmListenerService : FirebaseMessagingService() { override fun onMessageReceived(remoteMessage: RemoteMessage){ if (SinchPush.isSinchPushPayload(remoteMessage.data)) { val result = SinchPush.queryPushNotificationPayload(context, remoteMessage.data) sinchClient.relayRemotePushNotification(result) ... } else { // it's NOT Sinch message - process yourself } }} ``` ## Huawei HMS Notifications The following sections explain how to register Huawei HMS push notifications: ### Huawei Prerequisites To use Huawei Push notifications you must also implement the [Huawei OAuth 2.0 Flow](#huawei-oauth-20-flow). ### HMS Step 1. Enable support for Push Notifications This step is almost the same for both FCM and HMS. Managed push notifications are enabled automatically once `PushConfiguration` is specified during `SinchClient` creation. ```kotlin val sinchClient = SinchClient.builder().context(context) .pushConfiguration(hmsPushConfiguration) ... .build() ... sinchClient.start() ``` Note: Using HMS Push requires that Huawei Mobile Services (HMS) is installed on the device. A prompt to install HMS will appear automatically the first time an HMS device token is being acquired. ### HMS Step 2. Update Sinch dashboard with required provider identification ### HMS Step 3. Provision application with support code Follow the [Huawei Push Kit Development Process](https://developer.huawei.com/consumer/en/doc/development/HMSCore-Guides/android-config-agc-0000001050170137) to acquire `agconnect-services.json`. Refer to [How to Integrate HMS Core SDK](https://developer.huawei.com/consumer/en/doc/development/HMSCore-Guides/android-integrating-sdk-0000001050040084) for the necessary changes in your Gradle build files. ### HMS Step 4. Acquire HMS device token Sinch SDK expects the application to acquire the HMS device token **before** creating `SinchClient`. An example of asynchronous HMS device token acquisition is provided in the `RegisterToHmsTask` class of the `sinch-rtc-sample-hms-push` sample application. The task extends `AsyncTask` and returns both the known `hmsApplicationId` and the unique `hmsDeviceToken`, which Huawei recommends re-acquiring on each application start. To read the HMS Application ID and acquire the HMS device token, use: ```kotlin val hmsApplicationId = AGConnectServicesConfig.fromContext(context).getString("client/app_id") val hmsDeviceToken = HmsInstanceId.getInstance(context).getToken(appId, "HCM") ``` Note: For this operation to succeed, your application must be signed and its signature fingerprint registered in the Huawei AGConnect console. See [AGConnect signing requirements](https://developer.huawei.com/consumer/en/doc/HMSCore-Guides-V5/android-config-agc-0000001050170137-V5#EN-US_TOPIC_0000001050170137__section193351110105114). Checklist for Obtaining the HMS Device Token - Application is registered on Huawei AGConnect Console (IMPORTANT: package name should match). - The AGConnect Console's application *project* has PushKit enabled. - The application is **signed**. - Fingerprint of the signature is registered in the AGConnect Console . - HMS is installed on the device (User will get UI Prompt automatically). - Device is connected to the internet. ### HMS Step 5. Register HMS device token on Sinch backend Create an instance of *HmsPushConfiguration* using the [HmsPushConfigurationBuilder](https://download.sinch.com/android/latest/reference/sinch-rtc/com.sinch.android.rtc/-hms-push-configuration-builder/index.html) and provide it to `SinchClient` during build. Start the client to register the device token with Sinch. ```kotlin val pushConfiguration = PushConfiguration.hmsPushConfigurationBuilder() .applicationId(hmsApplicationId) .deviceToken(hmsDeviceToken) .build() val sinchClient = SinchClient.builder() .context(applicationContext) .applicationKey("") .userId("") .environmentHost("ocra.api.sinch.com") .pushConfiguration(pushConfiguration) .build() sinchClient.addSinchClientListener() sinchClient.start() ``` ### HMS Step 6. Implement *Listening Service* Implement your *HmsListerningService* by extending the *HmsMessageService*: ```kotlin class HmsListenerService : HmsMessageService() { override fun onMessageReceived(message: RemoteMessage) { if (SinchPush.isSinchPushPayload(message.dataOfMap)) { val result = SinchPush.queryPushNotificationPayload(context, message.dataOfMap) sinchClient.relayRemotePushNotification(result) ... } else { // it's NOT Sinch message - process yourself } }} ``` ## Sample Applications As a developer, you will be responsible for implementing the code that receives the push message. - For FCM example, please see the sample apps `sinch-rtc-sample-push` and `sinch-rtc-sample-video-push`. - For HMS example, please see the sample app `sinch-rtc-sample-hms-push`. The following sections cover how to support receiving calls and messages via push notifications. ## Receive and Forward Push Notifications to a Sinch Client Once you have received the `RemoteMessage` in your *listening service* you should forward it to the Sinch client. In order to do so: 1. Verify it is a Sinch payload by calling [SinchPush.isSinchPushPayload](https://download.sinch.com/android/latest/reference/sinch-rtc/com.sinch.android.rtc/-sinch-push/index.html). 2. If it is transform it into the [CallNotificationResult](https://download.sinch.com/android/latest/reference/sinch-rtc/com.sinch.android.rtc/-sinch-push/index.html) by calling [SinchPush.queryPushNotificationPayload](https://download.sinch.com/android/latest/reference/sinch-rtc/com.sinch.android.rtc/-sinch-push/index.html). 3. At this point CallNotificationResult can be inspected and provide information about participants, whether the call timed out and whether the call offers video. 4. Forward provided CallNotificationResult to the Sinch Client by calling [SinchClient.relayRemotePushNotificationPayload](https://download.sinch.com/android/latest/reference/sinch-rtc/com.sinch.android.rtc/-sinch-client/relay-remote-push-notification.html). ## Send and Receive Custom Headers via Sinch Managed Push The Sinch SDK supports adding custom headers in push notification messages when initiating a call, so developers don't need to implement their own push mechanism if they only need to deliver small pieces of information along the Sinch managed push between their app instances. The Sinch SDK allows up to *1024* bytes of custom headers. Setting custom headers on the sender side when initiating a call: ```kotlin val headers = hashMapOf( "First key" to "123", "Second key" to "second value" ) val call = callController.callUser(userId, new MediaConstraints(false), headers) ``` If custom headers were supplied by call initiator, they can be retrieved from notification result using `callResult.callHeaders` API: ```kotlin if (SinchPush.isSinchPushPayload(remoteMessage.data)) { val result = SinchPush.queryPushNotificationPayload(context, remoteMessage.data) // For HMS use remoteMessage.dataOfMap API instead. val customHeaders = callResult.callHeaders } ``` Note: It's possible to retrieve custom headers without starting the client (doing it allows you to create some early reject logic without the need to initiate a more resource demanding process of creating and starting the Sinch client). ## Unregister a Device If the user logs out or this device should no longer receive incoming call push notifications, call `SinchClient.unregisterPushToken()` to prevent further notifications. Note: If your application assumes frequent change of users (logging in and out), it's imperative to unregister the device by using `SinchClient.unregisterPushToken()` on each log out to guarantee that a new user won't receive incoming calls intended to the previous one. ## Permissions Required You don't need to manually add any permission to the application manifest - all required changes will be added automatically by the **gradle** depending on the configuration file you provide (**google-service.json** or **agconnect-services.json**). ## FCM v1 OAuth2.0 Flow Sinch requests FCM push notifications using the FCM v1 API, which requires OAuth2 short‑lived access tokens. Your backend must expose two endpoints that Sinch will call to obtain these tokens: 1. An OAuth2 Authorization Server endpoint that issues an access token for your security domain (Client Credentials flow). 2. A protected Resource Server endpoint that mints an FCM v1 access token using your Firebase service account. Overview of the flow: ![Sinch - FCM v1 OAuth Flow](/assets/20242201-fcm-v1-migration.cce89dd401236cdb023be4aececd57b3d69f277511f9ddd4f33efbac9c872f9d.5f3ff73a.png) ### Key takeaways from the diagram above 1. When Sinch needs a new `access_token_FCM` (required to request a push message via FCM v1 API), it will first make a request to your *Authorization Server* to obtain a `access_token_RO` valid for your security domain (*RO* as in *Resource Owner*). 2. Having obtained an `access_token_RO`, Sinch will make a subsequent request to your FCM access token endpoint, providing `access_token_RO` as a *Bearer* token. 3. Your *Resource Server* should pass the `access_token_FCM` (as received from Firebase) in the response back to Sinch. 4. Sinch will only make requests to "Your Auth Server" endpoint and "Your FCM Token endpoint" as needed, not for every push message sent. Sinch will cache the FCM access token in accordance to the value of `expires_in`. 5. See [Implementing the FCM Token Endpoint](#implementing-the-fcm-token-endpoint) section for details on how to mint `access_token_FCM`. ### Contextualizing the diagram in the OAuth2.0 standard 1. The component labeled "Your FCM Token endpoint" is your [*OAuth2.0 Resource Server*](https://www.oauth.com/oauth2-servers/the-resource-server/), with the resource being the FCM tokens. 2. The `scope` mentioned in the diagram is [*OAuth2.0 Scope*](https://www.oauth.com/oauth2-servers/scope/), and its default value is `https://www.googleapis.com/auth/firebase.messaging`. 3. The tokens provided by "Your Auth server" and "Your FCM token endpoint" are [*OAuth2.0 Access Tokens*](https://www.oauth.com/oauth2-servers/access-tokens/access-token-response/). 4. The requests to "Your Auth server" and "Your FCM Token endpoint" will have `Content-Type: application/x-www-form-urlencoded`, according to [OAuth2 standard](https://datatracker.ietf.org/doc/html/rfc6749). ### Providing OAuth configuration to Sinch Select your app in the [Sinch Dashboard](https://dashboard.sinch.com/voice/apps), and the **In-app Voice & Video SDKs** tab. The configuration for FCM consists of the following fields in the "Google FCM Identification" section: | Field name | Field value | | --- | --- | | **Access token URL** | URL of your Auth Server endpoint | | **FCM token URL** | URL of your FCM token endpoint | | **Client ID** | Your `client_id` | | **Client Secret** | Your `client_secret` | | **Scope** | An OAuth *scope* (optional, will default to `https://www.googleapis.com/auth/firebase.messaging`) | ### Implementing the Authorization server Endpoint As described in the overview, Sinch will make a request to your *Authorization server*, to request an access token valid for the "FCM token endpoint". The request will be populated with the fields from the OAuth configuration you provided (see [Providing OAuth configuration to Sinch](#providing-oauth-configuration-to-sinch) section), and it will be of the following form: ```text POST / Content-Type: application/x-www-form-urlencoded grant_type=client_credentials client_id= client_secret= scope= ``` Example response to Sinch: ```text HTTP/1.1 200 OK Content-Type: application/json;charset=utf-8 { "access_token": "", "expires_in": 3600, "token_type": "Bearer" } ``` The `access_token` included in the response will then be used by Sinch as Bearer token in the subsequent call to the "FCM token endpoint". ### Implementing the FCM Token Endpoint As described in the overview, Sinch will make a request to your *Resource Server* FCM token endpoint, requesting an FCM access token. The request will be of the following form: ```text POST / Authorization: Bearer Content-Type: application/x-www-form-urlencoded grant_type=client_credentials fcm_project_number= ``` Example response to Sinch: ```text HTTP/1.1 200 OK Content-Type: application/json;charset=utf-8 { "access_token": "", "expires_in": 3600, "token_type": "Bearer" } ``` Notes: * Sinch will be able to use this `access_token` to send push messages to your end-user devices until the token expires, upon which Sinch will issue a new token request to your *Authorization Server* and *Resource Server*; the recommendation is that you obtain a new FCM access token every time Sinch requests it. * Sinch will cache the `access_token` according to its `expires_in` value; the default value for `expires_in` in Google Auth Library is 1 hour (3600 seconds) and maximum value is 86400 (24h) * Your implementation of this resource endpoint should obtain an FCM `access_token` using one of the methods recommended by the [Firebase documentation](https://firebase.google.com/docs/cloud-messaging/auth-server) - see also [Google API Client Libraries](https://developers.google.com/api-client-library/) for a list of implementations of the Google Auth Library. * You might have to provide a list of permissions when creating an FCM private key; in such case, only `cloudmessaging.messages.create` (see [GCP's Permissions reference](https://cloud.google.com/iam/docs/permissions-reference)) is required. * `FcmProjectNumber` is an unique identifier of your Firebase project; note that every Firebase project has [2 unique identifiers](https://firebase.google.com/docs/projects/learn-more#project-identifiers): "project ID" and "project number", and both [are supported](https://firebase.google.com/docs/reference/fcm/rest/v1/projects.messages/send#path-parameters) in the context of FCM v1. However, Sinch will use `fcmProjectNumber` because it's already available in Sinch backend: whenever a Sinch client is created, this value is provided as `senderId`. See: * Sinch Android SDK [reference docs](https://download.sinch.com/android/latest/reference/sinch-rtc/com.sinch.android.rtc/-fcm-push-configuration-builder/sender-i-d.html), and keep in mind that "sender ID" has the same value of "FCM project number"; * Sinch Android public docs about [acquiring FCM push configuration](https://developers.sinch.com/docs/in-app-calling/android/push-notifications/#fcm-step-4-acquire-fcm-push-configuration). ## Huawei OAuth 2.0 Flow Sinch supports Huawei push messages via [Huawei Push Kit](https://developer.huawei.com/consumer/en/doc/development/HMSCore-Guides/service-introduction-0000001050040060) (*HPK*) which is part of [Huawei Mobile Services](https://developer.huawei.com/consumer/en/hms) (*HMS*). The Sinch SDKs and platform can take care of sending push notification messages via *Huawei Push Kit* on your behalf as part our *Sinch Managed Push Notifications* functionality. To enable Huawei push messages for Android devices you will need to do two things: 1. Make use of the *Huawei* (*HMS*) APIs in the Sinch Android SDK [as described above](#huawei-hms-notifications). 2. Implement an *OAuth 2.0 Authorization Server* endpoint that can provide Sinch with *OAuth 2.0* *access_tokens* required to send messages via *HPK* on your behalf. Sinch will send push notification messages via the [Huawei Push Kit API](https://developer.huawei.com/consumer/en/doc/HMSCore-References-V5/https-send-api-0000001050986197-V5). Huawei Push Kit supports (and requires) an *OAuth 2.0* *Client Credentials* flow to authenticate against the *Huawei Push Kit* server endpoint(s). Your Huawei app in Huawei *AppGallery Connect* will have an *App ID* and an *App secret*. These are to be used as OAuth client credentials: `client_id` and `client_secret` respectively. Sinch supports Huawei OAuth flow by delegation. You will keep your `client_secret` on your backend, and Sinch will request an HMS OAuth `access_token` via an server-side HTTP API endpoint that you implement. Sinch supports two different alternatives for how to provide Sinch with an HMS access token: - **A)** A HMS token endpoint protected by a standard OAuth 2.0 *Client Credentials* flow. This is a good fit if you have an existing OAuth 2.0 Authorization Server that's used to protect and grant access access to your server-side endpoints. - **B)** A HMS token endpoint protected using your existing Sinch credentials (Sinch *Application Key* and *Application Secret*). This is a good fit if you don't have an OAuth 2.0 Authorization Server to grant access to your server-side endpoints. ### Alt A) Huawei OAuth Flow Using Your OAuth 2.0 Domain This flow assumes you have an OAuth 2.0 conforming *Authorization Server* that supports the *Client Credentials* grant type. The flow is implemented in terms of two key steps: 1. You create a set of OAuth 2.0 *Client Credentials* that are valid within **your** OAuth domain, and configure those for your *Sinch Application*. 2. You implement a HMS token endpoint that provides a HMS access token (labeled `$push_token_endpoint` in diagram below). In the [Sinch Dashboard](https://dashboard.sinch.com/) you should configuring the following: - *OAuth 2.0 access token endpoint* (URL) - *Client Credentials* (`client_id` and `client_secret`) - An OAuth *scope* (optional to specify, will default to `https://push-api.cloud.huawei.com`) - HMS token endpoint (URL) The overall flow is depicted below: ![Sinch - Huawei OAuth Flow using your OAuth domain](/assets/20201130-sinch-huawei-hpk-oauth-a.93a909375870fb2e4d74211035a0562ab98063e72adaf10b608288330f3fa0a4.5f3ff73a.png) Key takeaways: 1. The component labeled *Your Resource Server* in the diagram is your *Resource Server* in the terminology of OAuth and the *resource* here being an *HMS access token*. 2. When Sinch needs a (new) HMS `access_token` required to send a push message to *Huawei Push Kit* server, it will first make a request to your *Authorization Server* to obtain an `access_token` valid for your security domain (labeled as `access_token_RO` in the diagram, *RO* as in *Resource Owner*). 3. Having obtained `access_token_RO`, Sinch will make a subsequent request to your HMS access token endpoint (labeled `$push_token_endpoint` in the diagram), providing `access_token_RO` as a *Bearer* token. 4. Your *Resource Server* should obtain a HMS `access_token` using the Huawei HMS OAuth Authorization Server endpoint and your Huawei *App ID* and *App secret* as `client_id` and `client_secret`. 5. Your *Resource Server* should pass the HMS `access_token` (as received from HMS) in the response back to Sinch. Sinch will only make requests to your Authorization Server access token endpoint and your HMS token endpoint as needed, not for every push message sent. Sinch will cache the HMS access token in accordance to the value of `expires_in`. Note: You can think of the step where you configure OAuth *Client Credentials* for your Sinch *Application* as a way of enabling Sinch and your Sinch *Application* in particular to make requests to your HMS token endpoint (*Resource Server*). #### Implementing the HMS Token Endpoint As described in the overview, Sinch will make a request to your *Resource Server* HMS token endpoint, requesting a *HMS* `access_token`. The request will be on the following form: ```text POST / Authorization: Bearer Content-Type: application/x-www-form-urlencoded grant_type=client_credentials& hms_application_id= ``` Your implementation of this resource endpoint should obtain an HMS `access_token` using the Huawei HMS OAuth endpoint, using your Huawei *App ID* and *App secret* as `client_id` and `client_secret`. The access token received from Huawei should then be included in the response back to Sinch. See [Huawei documentation](https://developer.huawei.com/consumer/en/doc/development/HMS-Guides/38054564) for how to implement requesting an OAuth *access token* using Huawei HMS. Example response to Sinch: ```json HTTP/1.1 200 OK Content-Type: application/json;charset=utf-8 { "access_token": "", "expires_in": 3600, "token_type": "Bearer" } ``` Sinch will then be able to use this `access_token` to send push messages to your end-user devices until the token expires, upon which Sinch will issue a new token request to your *Authorization Server* and *Resource Server*. Attention! You will receive your *HMS App ID* as a request parameter (`hms_application_id`) and you can use that for a given request to map it to your corresponding *HMS App*. Note: [OAuth 2.0 access token response](https://www.oauth.com/oauth2-servers/access-tokens/access-token-response/). ### Alt B) Huawei OAuth Flow Using Sinch Application Credentials The overall flow is depicted below: ![Sinch - Huawei OAuth Flow using Sinch credentials](/assets/20201130-sinch-huawei-hpk-oauth-b.9f8c7574a6130ed00bce3a9fd7ab47277314293e9db7f51ae274fe68f36e60df.5f3ff73a.png) Key takeaways: 1. When Sinch needs an `access_token` required to send a push message to *Huawei Push Kit* server, it will make an OAuth request using a *Client Credentials* grant type to your *Authorization Server*. This request will be specifying an `client_assertion_type=urn:ietf:params:oauth:client-assertion-type:jwt-bearer` as the value for `client_assertion` provides a JWT that's symmetrically signed with your *Sinch Application Secret*. 2. Your *Authorization Server* should validate the JWT provided as `client_assertion` by Sinch and that the signed JWT is signed with your *Sinch Application Secret*. 3. Your *Authorization Server* should obtain a HMS `access_token` using the Huawei HMS OAuth Authorization Server endpoint and your Huawei *App ID* and *App secret* as `client_id` and `client_secret`. 4. Your *Authorization Server* should pass the HMS `access_token` (as received from HMS) in the response back to Sinch. Sinch will only make requests to your Authorization Server access token endpoint and your HMS token endpoint as needed and not for every push message sent. Sinch will cache the HMS access token in accordance to the value of `expires_in`. Details on how to validate the JWT provided by Sinch as `client_assertion` are available in the following sections. (The use of `client_assertion` and `client_assertion_type=urn:ietf:params:oauth:client-assertion-type:jwt-bearer` is based on [RFC 7523](https://tools.ietf.org/html/rfc7523) and [RFC 7521](https://tools.ietf.org/html/rfc7521#section-4.2) and part of the [OpenID Connect Core 1.0 standard](https://openid.net/specs/openid-connect-core-1_0.html#ClientAuthentication).) #### Validating the `client_assertion` JWT provided by Sinch As described in the overview, Sinch will make a request to your OAuth *Authorization Server* endpoint, requesting a *HMS* `access_token`. The request will be on the following form: ```text POST /sinch/rtc/push/oauth2/v1/huawei-hms/token HTTP 1.1 Host: as.your-domain.com Content-Type: application/x-www-form-urlencoded grant_type=client_credentials& scope=https%3A%2F%2Fpush-api.cloud.huawei.com& client_assertion_type=urn%3Aietf%3Aparams%3Aoauth%3Aclient-assertion-type%3Ajwt-bearer client_assertion= ``` Note: The value of `scope` and `client_assertion_type` in the example above are URL-encoded The `JWT` will be making use of the standard JWT header parameters `alg` and `kid`, and the standard claims `iss`, `sub`, `iat`, `exp`, `nonce` and `aud`. Before we jump to the details of how to validate this token, here is an example: ```json // JWT Header (example) { "alg": "HS256", "kid": "hkdfv1-20200901", "sinch:rtc:application_key": "a32e5a8d-f7d8-411c-9645-9038e8dd051d" } // JWT Payload (example) { "iss": "//rtc.sinch.com/applications/a32e5a8d-f7d8-411c-9645-9038e8dd051d", "sub": "123456789", "aud": "https://as.your-domain.com/sinch/rtc/push/oauth2/v1/huawei-hms/token", "scope": "https://push-api.cloud.huawei.com", "sinch:rtc:application_key": "a32e5a8d-f7d8-411c-9645-9038e8dd051d", "iat": 1600780504, "exp": 1600784104, "nonce": "6b438bda-2d5c-4e8c-92b0-39f20a94b34e" } ``` - Claim `iss` is on the form `//rtc.sinch.com/applications/` (canonical form) - Claim `sub` is your *HMS App ID* (as specified via `HmsPushBuilder.applicationId(String)` on the Android client). - Claim `aud` will be set to the *Authorization Server* token endpoint you have configured with Sinch. example `https://as.your-domain.com/sinch/rtc/push/oauth2/v1/huawei-hms/token` - Claim `scope` will be `https://push-api.cloud.huawei.com` (representing the Huawei *Push Kit* server domain) - Claim `sinch:rtc:application_key` will contain your *Sinch Application Key*`. - Claims `iat`, `exp`, `nonce` are standard JWT claims (see [JWT RFC 7519](https://tools.ietf.org/html/rfc7519)) Note: Your *Sinch Application Key* is present both in the JWT header and the JWT payload (as header parameter and claim `sinch:rtc:application_key`). The reason, is that it allows you to implement validating the JWT signature without accessing the payload, and once you have validated the JWT signature, you can strip away the header and all the data you need for further processing is self contained in the payload. ##### `kid` and Deriving a Signing Key from Sinch Application Secret The `kid` parameter in the JWT header is on the form `hkdfv1-{DATE}` where `{DATE}` is date of signing in UTC on format `YYYYMMDD`. When validating the JWT, use a signing key that's derived from your *Sinch Application Secret* as follows. Given: - A function `HMAC256(key, message)`. - A date-formatting function `FormatDate(date, format)`. - The date of signing as variable `signedAt`. This is to be extracted from the JWT header parameter `kid`. - *Sinch Application Secret* as variable `applicationSecret`, holding the secret as a *base64* encoded string. Derive the signing key as follows: ```text signingKey = HMAC256(BASE64-DECODE(applicationSecret), UTF8-ENCODE(FormatDate(signedAt, "YYYYMMDD"))) ``` Note: This is the same key derivation scheme as used for [Token-based User registration](/docs/in-app-calling/android/application-authentication) ##### Validating the JWT Your *Authorization Server* should validate the JWT in accordance with section [RFC 7523 - Section 3. JWT Format and Processing Requirements](https://tools.ietf.org/html/rfc7523#section-3). Here is a rough outline of the steps necessary: 1. Use JWT header parameter `sinch:rtc:application_key` to lookup your corresponding *Application Key* and *Application Secret* (at this point the token is still unvalidated) 2. Derive the signing key (as detailed in the previous section) 3. Validate that the JWT has a valid signature given the signing that you have derived. 4. Validate the JWT payload in terms of `iat`, `exp`, `nonce` etc. 5. Validate that the claim `scope` is `https://push-api.cloud.huawei.com` Examples of JWT creation Visit [https://github.com/sinch/sinch-rtc-api-auth-examples](https://github.com/sinch/sinch-rtc-api-auth-examples) for example implementations of JWT generation. #### Acquiring an `access_token` from Huawei HMS After validating the JWT client assertion, your *Authorization Server* should in turn request an `access_token` from the Huawei HMS OAuth endpoint, using your Huawei *App ID* and *App secret* as `client_id` and `client_secret`. The access token received from Huawei should then be included in the response back to Sinch. See [Huawei documentation](https://developer.huawei.com/consumer/en/doc/HMSCore-Guides/open-platform-oauth-0000001050123437-V5#EN-US_TOPIC_0000001050123437__section12493191334711) for how to implement requesting an OAuth *access token* using Huawei HMS. Example response to Sinch: ```json HTTP/1.1 200 OK Content-Type: application/json;charset=utf-8 { "access_token": "", "expires_in": 3600, "token_type": "Bearer" } ``` Sinch will then be able to use this `access_token` to send push messages to your end-user devices until the token expires, upon which Sinch will issue a new token request to your *Authorization Server*. Note: You will receive your *HMS App ID* in JWT claim `sub` and you can use that to for a given request map it to your corresponding *HMS App*. You will also be able to access your *Sinch Application Key* as the JWT claim `sinch:rtc:application_key` if you need that as input at this stage. #### Rejecting the `access_token` grant request If your *Authorization Server* rejects the access token request from Sinch, it should respond with a HTTP response that's compliant with the [OAuth 2.0 standard](https://www.oauth.com/oauth2-servers/access-tokens/access-token-response/). Example: ```json HTTP/1.1 400 Bad Request Content-Type: application/json;charset=utf-8 { "error": "unauthorized_client", "error_description": "Your helpful error description" } ``` Please see [https://www.oauth.com/oauth2-servers/access-tokens/access-token-response/](https://www.oauth.com/oauth2-servers/access-tokens/access-token-response/) for details on how to formulate conformant OAuth error responses. Note: For use cases requiring only outgoing App-to-Phone, App-to-SIP, or Conference calls, providing `PushConfiguration` is not required. You can place these calls directly once the Sinch client is started. ### Additional Resources - Examples how to validate a client assertion JWT at [https://github.com/sinch/sinch-rtc-api-auth-examples](https://github.com/sinch/sinch-rtc-api-auth-examples). - [FCM documentation](https://firebase.google.com/docs/cloud-messaging) - [OAuth2.0 official website](https://oauth.net/2/) - [OAuth2.0 RFC](https://datatracker.ietf.org/doc/html/rfc6749) - [Client Credentials flow](https://auth0.com/docs/get-started/authentication-and-authorization-flow/client-credentials-flow) - [Google client libraries](https://developers.google.com/api-client-library/), to support FCM token generation - [Huawei HMS OAuth Client Credentials Flow](https://developer.huawei.com/consumer/en/doc/HMSCore-Guides/open-platform-oauth-0000001050123437-V5#EN-US_TOPIC_0000001050123437__section12493191334711) - [OAuth 2.0 Client Credentials](https://www.oauth.com/oauth2-servers/access-tokens/client-credentials/) - [OAuth `client_secret_jwt`](https://openid.net/specs/openid-connect-core-1_0.html#ClientAuthentication) - [RFC 7523 - JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants](https://tools.ietf.org/html/rfc7523) - [RFC 7521 - Assertion Framework for OAuth 2.0 Client Authentication and Authorization Grants](https://tools.ietf.org/html/rfc7521#section-4.2)