Report a Phone Call verification code with Python

Now that you've initiated a verification request and received a code, it's time to report that code in order to verify the identity of the user.

In this guide you will learn:

What you need to know before you start

Before you can get started, you need the following already set up:

Set up your Python application and install dependencies

We'll be using the requests module to make HTTP requests. Open a command prompt and use the following command to install the requests module:
Copy
Copied
pip install requests
Create a new file named report-verification.py and paste the provided "report-verification.py" code found on this page into the file.
Note:

This tutorial uses basic authentication for testing purposes. We recommend using a signed request for authentication in a production environment. You can follow the steps in this guide, but use the code samples from here to use request signing authentication instead.

This code makes a PUT request to the Verification API /verifications/number endpoint which uses the toNumber parameter to verify that a code sent to that number is valid.

Fill in your parameters

Before you can run the code, you need to update some values so you can connect to your Sinch account. Update the following parameters with your own values:

ParameterYour value
applicationKeyThe application key found on your Sinch dashboard.
applicationSecretThe application secret found on your Sinch dashboard.
toNumberThis should be the number of the mobile handset you are using for this guide.
codeThis is the code which was received by the mobile handset in the initiate verification guide. These codes are only valid for 10 minutes, so ensure you have initiated a verification within the last ten minutes so you can successfully match the code!
Note:

When your account is in trial mode, you can only message your verified numbers. If you want to send a message to any number, you need to upgrade your account!

Save the file.

Report your verification request

Now you can execute the code and report your verification code. Run the following command:

Copy
Copied
python report-verification.py

If the code was correct, your console will show a success result in the response from Sinch. You can test this by entering an incorrect code and seeing the failed result response.

Troubleshooting tip

If after running your app you receive a 5000 error response, you may have forgotten to save your file after adding your authentication values. This is an easy mistake to make! Try saving the file and running the app again.

Additional resources

We'd love to hear from you!
Rate this content:
Still have a question?
 
Ask the community.